跳到主要内容

Connect a HTTP Device Via Gateway

Introduction to LwM2M Gateway​

The LwM2M (Lightweight Machine to Machine) Gateway consists of two main components: an LwM2M client that connects to the LwM2M server and an HTTP client that connects to deviceShifu. The LwM2M Gateway enables deviceShifu to adapt to the LwM2M protocol, handle requests from the LwM2M server, and push data to the cloud, fulfilling the two major functions required by the LwM2M protocol: the capability to pull data from the device and post data from the cloud to the device.

Pull and Deploy the Shifu Project​

Before pulling the project from GitHub, you need to download the relevant Git environment, which can be quickly installed using yum. After setting up Git, clone Shifu to your local machine. Finally, please use the latest configuration file to ensure support for the latest protocols.

sudo yum -y install git
git clone https://github.com/Edgenesis/shifu.git
kubectl apply -f pkg/k8s/crd/install/shifu_install.yml

Get the Example and Deploy LwM2M deviceShifu​

We'll take connecting a HTTP-based thermometer as an example. Below is the general data flow of our access:

  1. First, we deploy the corresponding LwM2M gateway. The code is located in examples/lwm2m_gw_http/deviceshifu-lwm2m. Let's deploy them in the cluster.
kubectl apply -f examples/lwm2m_gw_http/deviceshifu-lwm2m
  1. Deploy and run the Device Adapter: deviceShifu-HTTP
kubectl apply -f examples/lwm2m_gw_http/deviceshifu-thermometer
  1. Ensure device connection. Our example includes a virtual thermometer device for your testing convenience.

The kubectl command allows you to view the status of deviceShifu:

kubectl get pods -n deviceshifu

We can see that deviceshifu-lwm2m-deployment and deviceshifu-thermometer-deployment are running normally.

NAME                                                 READY   STATUS    RESTARTS      AGE
deviceshifu-lwm2m-deployment-794ddd9978-z7lcq        1/1     Running   2 (44m ago)   44m
deviceshifu-thermometer-deployment-b98fbbcf8-6g69b   2/2     Running   3 (42m ago)   43m

Running Results​

We can check our exposed ports using the following command:

kubectl get svc -n deviceshifu
NAME                        TYPE           CLUSTER-IP     EXTERNAL-IP   PORT(S)                       AGE
deviceshifu-lwm2m-service   NodePort       10.43.47.30    <none>        80:30080/TCP,5683:30000/UDP   47m
deviceshifu-thermometer     LoadBalancer   10.43.64.126   <pending>     80:31703/TCP                  46m

As we can see, the external client service port is 31703. Let's test it using curl, apifox, or postman.

curl http://<Your Server IP>:31703/read_value

Test result reference:

19

Fill in your server IP address in Your Server IP to perform a simple test.